Home Search Site Map

Eastside CARSTAR Auto Rebuild
Autobody and Collision Repair Specialist for Bellevue and the Eastside

   

Home
Introduction
Directions
Shop Tour
Repair Status
Financing
National Warranty
Toyota Corolla
Jaguar Repair
Land Rover
Saturn Letter
Satrun SC2
Saturn SL1
Our People
FAQ's

 

Rolls Royce Bellevue

 

 

 

Take a look at our Shop

Car-O-Liner

Datasht.jpg (109615 bytes)We Feature Several Car-O-Liner Bench Systems. The Car-O-Liner Bench System is a unibody and frame repair system. It Anchors your vehicle to a bench platform and includes a measuring system, which is accurate to within several millimeters. Car-O-Liner provides us with up to date frame and unibody measurements or "blue prints" for almost any production vehicle. The repair system includes several  hydraulic pulling arms or towers which we use to reposition the unibody back to the correct dimensions. We use the Car-O-Liners in conjunction with our in ground hoist so we can lift the vehicle while pulling on it, to make access to the underside of the vehicle much more accessible. We have a variety of clamps used to anchor the vehicle to the pulling devices, helping us achieve our pulls without creating damage due poor clamping techniques. You are welcome to view the Car-O-Liner Website for more information. Also see Saturn SL1 repair & Saturn SC2 repair for Pictures of the bench in action.

 

Garmat Downdraft Paint Booth

PAINTBOOTH1.JPG (31146 bytes)Garmat Paint Booths are know through out the world for the quality of not only their product (the booth) but the quality of the finish produced in their paint booth. The Garmat booth has a balanced air flow which will move large amounts of air, without creating turbulence, within the spray booth. It is important to remove over-spray and solvent from the spray booth for not only the painters health, but also to ensure a smooth glossy finish. After the paint has been applied it should be baked. The Garmat we use is capable of baking the finish at temperatures of over 180 degrees. 

This booth balances air flow by the use of two fans, an intake and an exhaust. The intake air is drawn through a pre-filter and forced through the ceiling filters in the booth. The over spray is then removed through filters in the floor before the exhaust is discharged. This is why it is called a downdraft, the air comes from the ceiling and is exhausted through the floor. This is important because the length of the Airflow is minimized, therefore reducing the likelihood of contamination by dirt or other foreign matter.

Glasurit Paint System 

P004015.jpg (43009 bytes)It is foolish to use cheap paint. Glasurit is considered to be the top of the line paint in the industry. There are plenty of cheaper alternatives which produce a commercially acceptable finish, but why settle for alright when you can get excellent. Glasurit is backed by a lifetime warranty.

We mix our paint in house to the formula developed to match vehicle manufacturer's color code. Glasurit offers alternate formulas, which we often use, in order to match factory color deviations. This picture  show the "color chips" which match the factory alternates. All of these chips are sprayed, instead of dyed, to allow for an accurate color sample. Each of the samples shown are the top card in a deck of about 50 samples. By mixing our paint in house we are able to tint the color, if necessary, in order to match any unique variant color on your vehicle.

 

 

Accidents Happen......      Choices are Made......      Make the RIGHT CHOICE

Home ] Introduction ] Directions ] [ Shop Tour ] Repair Status ] Financing ] National Warranty ] Toyota Corolla ] Jaguar Repair ] Land Rover ] Saturn Letter ] Satrun SC2 ] Saturn SL1 ] Our People ] FAQ's ]